Can Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) Live Together?
Keeping Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) together is possible but requires caution due to differing aggression levels and potential behavioral clashes. Provide a spacious tank of at least 72 litres with plenty of hiding spots to reduce stress. Monitor behaviour closely, especially during the first few weeks.
At a Glance
Behaviour & Temperament
Figure 8 Puffer (Brackish) is a semi-aggressive species (8/10), while X-Ray Tetra (Pristella) is peaceful (1/10). This notable difference means Figure 8 Puffer (Brackish) may occasionally assert dominance over X-Ray Tetra (Pristella).
Large aggression gap (7 points) between Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) increases stress risk for the more peaceful fish.
Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) both frequent the Middle (Open Water) and Bottom (Substrate) region of the setup. This overlap can increase competition for space, so providing ample room and cover is important to keep both species comfortable.
Additional behavioural considerations to keep in mind: Shrimp eaters may also prey on very small nano fish.
To improve the chances of a peaceful coexistence in this community tank: Provide a significantly larger tank (at least 50% more volume than the minimum) to allow both Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) to establish separate territories. Add plenty of line-of-sight breaks using driftwood, rocks, and dense planting to reduce territorial confrontations. A larger aquarium with ample hiding spots can help diffuse aggression and give the less dominant fish space to retreat. Keep fin nippers in larger groups to distribute nipping behaviour among conspecifics rather than tank mates.
Water Parameters
The safe temperature window for both species falls between 24°C and 28°C. Aim for the midpoint of this range (around 26.0°C) for optimal comfort.
Both fish can tolerate a pH between 7.5 and 8. Maintaining a stable value within this band is more important than hitting an exact number.
For general hardness, the shared comfort zone is 10–20 dGH. Regular testing will ensure conditions stay within this range. An aquarium test kit is recommended for monitoring.
Tank Setup
To house Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) together, plan for an aquarium of at least 72 litres with a minimum length of 60 cm. This accounts for the larger species' space requirements with an additional 20 % buffer to reduce territorial tension.
Because this pairing requires extra vigilance, include plenty of hiding spots — caves, driftwood, and dense plant clusters — so the less dominant fish can retreat when needed.
Specific environmental needs for this combination include: Sand (Sifters), Shells (Breeding/Hiding), Plants - Densely covered. Meeting these requirements will help both species thrive.
Both species do well with moderate (standard) water movement, so a standard filtration setup rated for the tank volume should suffice.
Find the right tank equipment
Browse tanks, décor, and equipment suited for this setup.
Diet & Feeding
Feeding time deserves special attention with this pairing. Figure 8 Puffer (Brackish) is a known shrimp eater and may prey on small invertebrates or nano fish like X-Ray Tetra (Pristella).
Frequently Asked Questions
Can Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) live together?▾
They can coexist, but the pairing requires careful monitoring. Provide ample space (at least 72 litres), plenty of hiding spots, and watch for signs of stress or aggression.
What size tank do Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) need?▾
A minimum of 72 litres (tank length at least 60 cm) is recommended. This provides enough space for both species to establish their own areas and reduces the likelihood of territorial disputes.
What water temperature is best for Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) together?▾
Keep the aquarium between 24°C and 28°C. A target of around 26.0°C sits comfortably within both species' preferred ranges.
Are Figure 8 Puffer (Brackish) or X-Ray Tetra (Pristella) aggressive?▾
Figure 8 Puffer (Brackish) is semi-aggressive (8/10) and X-Ray Tetra (Pristella) is peaceful (1/10). The gap in aggression levels means the calmer fish may experience stress from the more assertive one.
What pH do Figure 8 Puffer (Brackish) and X-Ray Tetra (Pristella) need?▾
Both species overlap in the 7.5–8 pH range. Consistency is key — avoid sudden swings, and test regularly to stay within this window.
Will Figure 8 Puffer (Brackish) nip X-Ray Tetra (Pristella)'s fins?▾
Figure 8 Puffer (Brackish) is a known fin nipper. If X-Ray Tetra (Pristella) has long or flowing fins, there is a real risk of fin damage. Keeping Figure 8 Puffer (Brackish) in a larger group can help redirect nipping behaviour toward conspecifics.
How do I manage Figure 8 Puffer (Brackish)'s territorial behaviour?▾
Provide line-of-sight breaks using rocks, driftwood, and dense planting. A larger tank gives Figure 8 Puffer (Brackish) space to claim a territory without encroaching on the other fish's area. Adding décor that divides the tank into distinct zones works especially well.
Related Comparisons
Figure 8 Puffer (Brackish) & Green Spotted Puffer (Brackish)
·
Figure 8 Puffer (Brackish) & Fahaka Puffer
·
Figure 8 Puffer (Brackish) & Mbu Puffer
·
Figure 8 Puffer (Brackish) & Dwarf Pea Puffer
·
Figure 8 Puffer (Brackish) & Amazon Puffer
·
Figure 8 Puffer (Brackish) & African Jewel Cichlid
·
X-Ray Tetra (Pristella) & Rummy-Nose Tetra
·
X-Ray Tetra (Pristella) & Black Neon Tetra
·
X-Ray Tetra (Pristella) & Bleeding Heart Tetra
·
X-Ray Tetra (Pristella) & Congo Tetra
·
X-Ray Tetra (Pristella) & Diamond Tetra
·
X-Ray Tetra (Pristella) & Emperor Tetra
·